BELT-TRACK con tracción por correa

24 Productos

  1. BELT-TRACK Track, straight

    • Extruded aluminium curtain track of AW 6063 T5 with integrated lateral channels for timing belts

    • Integrated slot in upper cord for mounting of suspensions, elements for cord operation and accessories

    • 4 Centring channels in upper and lower cord to receive roll pins for flush connection

    EUR 72,10 / m
    EUR 85,80incl. 19% IVA

  2. BELT-TRACK OFFICE Ceiling Suspension

    • For reinforced concrete ceilings

    • Aesthetic round pipe as stabilizer link and spacer to the ceiling

    • Including fasteners for mounting together with suspension brackets

    • For reinforced concrete with HKD anchor M6 - without fasteners

    desdeEUR 88,60 / unid.
    EUR 105,43incl. 19% IVA

  3. G-TRACK OFFICE Ceiling Suspension

    • Para techos de hormigón armado.
    • Tubo redondo estético como enlace estabilizador y distanciador al techo.

    • Conexión al carril mediante placa de montaje que encaja con el canal superior del carril.
    desdeEUR 67,00 / unid.
    EUR 79,73incl. 19% IVA

  4. BELT-TRACK Track Splice

    • Connects two track sections

    • Including 4 roll pins for flush connection

    1. negro
    EUR 41,20 / unid.
    EUR 49,03incl. 19% IVA

  5. BELT-TRACK Set-in Slot Nut

    • To insert into the upper channel of the track profile

    • With threaded hole

    EUR 9,30 / unid.
    EUR 11,07incl. 19% IVA

  6. BELT-TRACK 2-Wheel Curtain Runner

    • Curtain mounting on 360°-plastics-swivel

    • Ball raced wheel with plastics tyre for minimized friction and long endurance

    • Plastics body

    • Bunched length optimized to 22 mm in stowage

    1. negro
    EUR 16,50 / unid.
    EUR 19,64incl. 19% IVA

  7. BELT-TRACK Master Runner with Belt-Clamp

    • To connect to the timing belt and close the belt

    • Steel body with rubber bump to reduce stowage noise

    • Ball raced wheel with plastics tyre for minimized friction and long endurance

    • Curtain mounting on central receiver

    • Bunched length optimized to 115 mm in stowage

    1. negro
    EUR 288,40 / unid.
    EUR 343,20incl. 19% IVA

  8. BELT-TRACK Master Runner

    • Steel body incl. Broken wheel retainer and rubber bump to reduce stowage noise

    • Ball raced wheel with plastics tyre for minimized friction and long endurance

    • Curtain mounting on central receiver

    • Bunched length optimized to 118 mm in stowage

    1. negro
    EUR 262,70 / unid.
    EUR 312,61incl. 19% IVA

  9. BELT-TRACK OFFICE Overlap-Arm-Set

    • Master Runner Add-on-set consisting of two overlap arms for lateral mounting

    • Each side with lateral receivers for curtain hooks

    • Overlap ≈ 55 mm

    • Bunched length of completed runner optimized to 190 mm in stowage

    1. negro
    EUR 58,70 / unid.
    EUR 69,85incl. 19% IVA

  10. BELT-TRACK OFFICE Master Runner Add-On Set

    • Master Runner Add-on-set consisting of two brackets for lateral mounting

    • Each side with lateral receivers for curtain hooks

    • Bunched length of completed runner optimized to 125 mm in stowage

    1. negro
    EUR 31,90 / unid.
    EUR 37,96incl. 19% IVA

  11. BELT-TRACK OFFICE Magnet

    • Add-on to OFFICE Master Runners and OFFICE Master Runner with double overlap arm

    • To interlink multi-layer curtains with inner and outer layers

    EUR 8,20 / unid.
    EUR 9,76incl. 19% IVA

  12. BELT-TRACK OFFICE Counterplate

    • Add-on to OFFICE Master Runners and OFFICE Master Runner with double overlap arm

    • To interlink multi-layer curtains with inner and outer layers

    desdeEUR 7,70 / unid.
    EUR 9,16incl. 19% IVA

  13. BELT-TRACK Overlap Arm Set

    • For BELT-TRACK Master and Heavy Duty Runners

    • Overlap = 350 mm

    EUR 85,50 / unid.
    EUR 101,75incl. 19% IVA

  14. BELT-TRACK Scenery Runner with Coupling to Toothed Belt

    • 4 top load bearing and 4 bottom stabilizing wheels, ball bearing

    • With fall protection

    • Load pick up with cardanic bedded fastening M8

    1. negro
    EUR 293,60 / unid.
    EUR 349,38incl. 19% IVA

  15. Curtain Hook for G-TRACK, TRUMPF, TRUMPF 95, STUDIO and BELT-TRACK

    • For G-TRACK, TRUMPF, TRUMPF 95, STUDIO/E and BELT-TRACK

    • Stainless Steel

    • Noncorrosive, even with preprocessed fabrics

    1. plata
    EUR 1,10 / unid.
    EUR 1,31incl. 19% IVA

  16. BELT-TRACK Overlap Unit

    • Consisting of two 180°-return pulley units and a 1,0 m track section

    • Mounting with three suspension brackets with through hole for M12

    • Integration length: 1.510 mm

    • Required integration clearance: 200 mm

    EUR 839,50 / unid.
    EUR 999,01incl. 19% IVA

  17. BELT-TRACK BELT DRIVE BT-R

    • Drive unit for positive locked transmission

    • With integrated gear limit switch along the track

    • Direct and positive locked transmission to return unit for BELT DRIVES

    • Easy control via wall switch (Art.-No. 2380 1001 or dry contacts)

    • Power supply: 230 VDC / 1,9 A

    • Power: 0,4 kW

    • Duty cycle: 100 %

    • Required integration clearance: 400 x 250 x 760 mm

    Precio a consultar

  18. BELT-TRACK BELT DRIVE BT12

    • Drive unit for positive locked transmission

    • Compact-drive with integrated gear limit switch along the track

    • Direct and positive locked transmission to return unit for BELT DRIVES

    • Power supply: 3x230 V / 400 VAC

    • Duty cycle: 40 %

    • Required integration clearance: 355 x 250 mm

    1. negro
    EUR 2.853,10 / unid.
    EUR 3.395,19incl. 19% IVA

  19. BELT-TRACK BELT DRIVE BT30

    • Drive unit for positive locked transmission

    • Compact-drive with integrated gear limit switch along the track

    • Direct and positive locked transmission to return unit for BELT DRIVES

    • Power supply: 3x230 V / 400 VAC

    • Duty cycle: 40 %

    • Required integration clearance: 355 x 250 mm

    1. negro
    EUR 3.234,20 / unid.
    EUR 3.848,70incl. 19% IVA

  20. BELT-TRACK BELT DRIVE BT-L

    • Drive unit for positive locked transmission

    • With series 51 geared cam limit switches

    • Direct and positive locked transmission to return unit for BELT DRIVES

    • Power supply: 3x230 V / 400 VAC

    • Duty cycle: 40 %

    • Required integration clearance: 355 x 200 mm

    1. negro
    EUR 3.738,90 / unid.
    EUR 4.449,29incl. 19% IVA

  21. BELT-TRACK Encoder-Unit BT12

    • Incremental encoder for integration in BT-M drive units

    • WDG-40A 500 Impulse ABN/HTL/TTL

    • Custom fit on demand

    EUR 582,00 / unid.
    EUR 692,58incl. 19% IVA

  22. BELT-TRACK Encoder-Unit BT-L

    • Incremental encoder for integration in BT-L drive units

    • WDG-40A 500 Impulse ABN/HTL/TTL

    • Custom fit on demand

    EUR 597,40 / unid.
    EUR 710,91incl. 19% IVA

  23. BELT-TRACK Encoder-Unit BT30

    • Incremental encoder for integration in BT-M drive units

    • WDG-40A 500 Impulse ABN/HTL/TTL

    • Custom fit on demand

    EUR 582,00 / unid.
    EUR 692,58incl. 19% IVA

  24. BELT-TRACK Return Unit for BELT DRIVES with belt tensioner

    • With track connector on the "left".

    • Tensions and returns belt at the end of the track.

    • Curtain mounting on lateral receivers.

    • To connect via two suspension brackets with through hole for M12.

    • To be combined with BELT DRIVES BT-M / BT-R / BT12 / BT30 / BT-L

    1. negro
    EUR 630,00 / unid.
    EUR 749,70incl. 19% IVA