VARIO-CARE HOLD 500 ml

System component compatible with Gerriets water-based seals and specific parquet seals as indicated in the respective application areas. Enhances slip resistance by creating a light surface texture, significantly increasing floor traction. To be applied as the final layer in the coating system application.

Note: Suitability for specific safety floorings, floating floors, highly textured surfaces, and raised nodules should be checked based on individual project requirements.

Application

• Preparation: Shake well.

• Mixing ratio: 10:1. Carefully and evenly mix VARIO-HOLD with the base coat. Then add the appropriate amount of hardener for the base coat.

• Application: Follow the application instructions for the respective coating system.

Notes:

• Using in lower layers does not affect the seal’s functionality but will not be effective.

• Prepare enough coating to apply a complete layer over the surface. Additional mixing may result in visible quality variations.

Consumption

• Mixture: 50 ml/m² (20 m²/l)

• Recommended coating: 50 ml/m² with a mixing ratio of 5 ml/m² (Coverage: 100 m²/0.5 l)

 Deviations are possible but do not meet slip resistance report requirements.

Drying Time

As described for the base system.

Storage

Protect from frost. Store in a cool, dry place, out of reach of children.

• Shelf life: 24 months in unopened original packaging from the manufacturing date. Observe the marked manufacturing date.

For detailed instructions, please refer to the instructions for use, which are available in the download area.